I/O Long Word Data Point Tag

Introduction

The I/O Long Word Data Point Tag maps a 64-bit unsigned integer to an external data source.

Configuration Properties

The I/O Long Word Data Point Tag supports the configuration properties of the Long Word Data Point Tag plus these properties:

Property	Type	Version	Description
AllowControls	BOOL	3.48	Whether Fernhill SCADA can send controls from this tag to the data source.
IODataSource	Reference	3.48	A reference to another tag that provides the external data for the tag.
IOItemName	WSTRING	3.48	The data item within the external data source.
OutOfService	BOOL	3.92	Whether retrieval of data from the external data source is suspended for this data point tag.

AllowControls

The AllowControls property controls access to the WriteValue Tag Command.

When AllowControls is FALSE, access to the WriteValue Tag Command is blocked. This prevents any user, or program, sending control requests to the data source from this tag. The default value is FALSE to follow security best practice of deny by default.

Even when AllowControls is TRUE, an operator requires the Write User Privilege to send controls to the data source.

For an operator to send a control to the data source, both of these conditions must be true:

The AllowControls property is TRUE.
The operator has the Write User Privilege.

IODataSource and IOItemName

The IODataSource and IOItemName properties define which data item the I/O Long Word Data Point Tag is associated with:

The IODataSource property sets the data source for the tag.
The IOItemName property sets the "Address" of the data within the data source.

To configure these properties:

Click the browse button ... of the IODataSource property and choose the data source.
Click the browse button ... of the IOItemName property.
Note: The format of the IOItemName property depends on the type of data source chosen.

To understand how the IOItemName property is formatted, see Data Address Format.

OutOfService

Use the OutOfService property to suspend retrieval of data from the external data source.

When OutOfService is False, data from the external data source is retrieved normally.
When OutOfService is True, retrieval of data is suspended and the data point tag quality is set to "Out of Service".

For normal operation, OutOfService should be set to False. If a data source is providing faulty data, it might be appropriate to set OutOfService to True.

Data Properties

The I/O Long Word Data Point Tag supports the data properties of the Long Word Data Point Tag.

Tag Commands

The I/O Long Word Data Point Tag supports tag commands of the Long Word Data Point Tag plus these tag commands:

Tag Command	Version	Description
WriteValue	3.12	Writes a new value to the data source via the I/O tag.

Relationships to Other Tag Types

The I/O Long Word Data Point Tag builds on the features of these tag types:

Further Information

Long Word Data Point Tag

To learn about properties common to all Long Word Tags.

Core Driver

To learn about the Core Data Driver.

Glossary

For the meaning of terms used in Fernhill SCADA.