Omron Channel Tag

Introduction

The Omron Channel Tag provides a SCADA communication channel to Omron PLC Devices.

Configuration Properties

The Omron Channel Tag supports the properties of the Active Channel Tag plus these properties:

Property	Type	Version	Description
FINSSourceNetworkAddress	USINT	1.0	The FINS source network address of Fernhill SCADA.
FINSSourceNodeAddress	USINT	1.0	The FINS source node address of Fernhill SCADA.

Note: These properties are only used if the channel uses the Omron FINS protocol, and the device tag has Bridge Mode enabled. Refer to Omron publication W342-E1-15 for details of Omron communication protocols.

Tag Commands

The Omron Channel Tag supports the tag commands of the Active Channel Tag.

Relationships to Other Tag Types

The Omron Channel Tag builds on the features of these tag types:

The Omron Channel Tag is used as a building block for these tag types:

Further Information

Active Channel Tag

To learn about the properties common to all active channel types.

Omron Serial Channel Tag

To learn about Omron serial channels.

Omron FINS/TCP Channel Tag

To learn about communication channels that support the FINS/TCP protocol.

Omron FINS/UDP Channel Tag

To learn about communication channels that support the FINS/UDP protocol.

Glossary

For the meaning of terms used in Fernhill SCADA.