Siemens S7 Ethernet Channel Tag

1. Fernhill SCADA
2. Help
3. Drivers
4. Siemens S7
5. Channel Tag

Introduction

The Siemens S7 Channel Tag provides a SCADA/HMI communication channel to Siemens S7 PLCs.

Configuration Properties

The Siemens S7 Channel Tag supports the properties of the Active Channel Tag.

Tag Commands

The Siemens S7 Channel Tag supports the tag commands of the Active Channel Tag.

Relationships to Other Tag Types

The Siemens S7 Channel Tag builds on the features of these tag types:

• Active Channel Tag
• Channel Tag
• Alarm Tag
• Core Tag

The Siemens S7 Channel Tag is used as a building block for these tag types:

• Siemens S7 Ethernet Channel Tag
• Siemens S7 Serial Channel Tag

Further Information

Siemens S7 Driver

For information on the Siemens S7 Driver.

Ethernet connection to an S7-200 PLC

To learn about connecting Fernhill SCADA to an S7-200 PLC.

Ethernet connection to an S7-300 or S7-400 PLC

To learn about connecting Fernhill SCADA to an S7-300 or S7-400 PLC.

To learn about alarm management.

Glossary

For the meaning of terms used in Fernhill SCADA.

Fernhill SCADA Version 3.37. Copyright © 2012-2019 Fernhill Software Ltd: All rights reserved.